OSHA 30 Haz/rope/fork/tools

___________ can be caused by repetitive motions or repeated shocks over prolonged periods of time. A. Toxic effects B. Carpal tunnel syndrome C. Biological hazards D. Hearing loss

Lead exposure con cause all of the following except: A. Skin burns B. Kidney damage C. Brain damage D. Sterility

The basic worksite analysis performed by an industrial hygienist includes: A. Inspection of all jobs, operations and work activities B. Research on how physical hazards at that worksite affect worker health C. Recommendations for any necessary, appropriate corrective actions D. All of the above

These types of contaminants can result from welding, cleaning or painting: A. Radiation B. Particulate C. Laser D. Gas or Vapor

An industrial hygienist identifies exposures, problems, tasks and risks of the workplace by performing a(n): A Hazard assessment B. Administrative analysis C. Environmental assessment D. Worksite analysis

What type of correctional program is used to plan the best way to control or prevent hazards in the event of an emergency? A. Medical program B. Emergency preparation C. Preventive maintenance system D. Engineering controls

In occupations where there is exposure to ionizing radiation, time, distance and ___________ are important in considering worker safety. A. Rest breaks B. Eye strain C. Shielding D. Proper lifting

The common drinking cup is ___________ in the working place. A. Allowed for emergency use B. A good idea C. Prohibited D. None of the above

One of the benefits of a well-designed ergonomic environment is low operating costs. A. True B. False

The first choice for how to reduce or eliminate a hazard is : A. Engineering controls B. Workplace controls C Personal protective equipment D. Administrative controls

General requirements do not apply to slings used in conjunction with other material handling equipment for the movement of material by hoisting. A. True B. False

When disposal material are dropped more than 20 feet to an exterior lacation, an enclosed che must be used. A. True B. False

Which of the following is the principal source of compensable injuries in the American work force? A. Roofing B. Operating machinery C. Manual material handling D. Masonry work

When using industrial fork-lifts, the load must be at the lowest position for traveling, and the manufacturer's operational requirements must be followed. A. True B. False

Which of the following is required for inclusion on a synthetic webbing label? A. Name and trademark of manufacturer B. Rated capacities for the type of hitch C. Type of material D. All of the above

When traveling on a fork lift, the carried load must be at the highest feasible position during travel. A. True B. False

A wire rope sling with a strength of 10000 pounds and a total working load of 2000 pounds has a design factor (multiplier) of ________ . A. 1 B. 2 C. 5 D. none of the above

Safe lifting training should include: A. General principles of ergonomics B. Procedures for reporting hazardous conditions C. Health risks related to improper lifting D. All of the above

Used lumber must have which of the following withdrawn before stacking? A. Moisture B. Any unlevel parts C. Nails D. All of the above

Maximum safe load limits of _______ must be posted within buildings and structures. A Roofs B. Floors C. Shelving D. Fork-lifts

Jacks must be inspected: A. At least once every 6 months B. When sent out and returned from repair C Before and after use when subjected to abnormal loads D. All of the above

Appropriate switches for belt sanders are: A. Positive on/off switches B. Momentary contact on/off switches C. Constant pressure switch D. None of the above

Powder actuated tools should never be used on _____ materials. A. Hard B. Metallic C. Brittle S. Wood

All ________ that are designed to accommodate guards must be equipped with properly functioning guards when in use. A. Abrasive wheels B. Power-operated tools C. Switches D. None of the above

Most tools that run on liquid fuel are powered by: A. Methanol B. Gasoline C. Propane D. None of the above

Jointers should be fitted with which of the following types of guards A. Point of operation guards B. Hood guards C.Foot guards D. Guards are not required for jionters :

Compressed air can be used for cleaning as long as it is less than 30 psi. A. True B. False

Impact tools, such as chisels, with ________ heads should be removed from use. A. Flat B. Mushroom C. Beveled D. Raised

What test should be performed on abrasive wheels? A. Pressure test B. Rotation test C. Ring test D. Speed test

Fixed, power-driven woodworking tools are not required to be provided with a disconnected switch that can either be locked or tagged in the off position. A. True B. False