Hand Tools

Used to move loads over a short horizontal distance

Used for checking level over a long range like a foundation

Ball and Peen hammer used to bend and shape metal.

side cutters Used to cut and/or grab electrical wire

Typically made out of wood or fiberglass.

Device used to quickly turn a socket.

Large tooth (not many teeth per inch) saw used to rip boards

Used to measure vertical distance due to its stiffness has special labels on 16" and 24"

automatic breaks on a____________can lock in place

Because of the long jaws it spreads the clamping force over a large area.

heavy duty tool used to drive posts or stakes

Measuring to a shiny surface causes?

when cutting with a ________________________Be sure to place a piece of cardboard under whatever you are cutting so that no damage is done.

Vertical up and down (walls)

horizontal (floors and ceilings)

always be sure to check the head is firmly attached

some levels will allow you to check a __________degree angle

proper angle for the blade of the cold chisel

Best and safest kind of utility blade

Best saw for cutting in a miter box or hand cutting angles.

much like a monkey wrench but with smooth jaws.

What type of saw is this? used to cut curves.

What type of clamp is this?

What type of screw is this?

Chisel should be replaced if the head is starting to look like a ____________________

Good tool for measuring and marking a straight line over long distances,some can be used as a plumb bob.

Round bladed shovel is used to ?

Flat bladed shovel is meant to ?

Pliers that can be used to grab flat or square objects the best are ?

a hinged socket driver is called a

a screwdriver is used to ?

When pulling a nail be sure the material attached to the nail is

Why are metal tape measures concave?

what do you call the hammer with a curved face to reduce hammer strikes to boards?

What do you put on a hand saw blade after cleaning it with an emory cloth?

What is used to drive a nail below the surface of the wood?

What is used to set a small hole or dent in metal to make sure the drill bit gets a good start?

Rasps are for primarily for wood, what are files mainly used on ?

a clamp for holding long pipe and has round jaws on each end

What is a long straight shovel called ?

What framing measurements do you see on a normal tape measure?

What part of a file do you put the handle on?

Type of screw head characterized by a 6-point star-shaped pattern

What is the only difference in a carpenters square and pipefitters square?

What is used to insure tools do not drop from a worker at height and hit those below?

The drywall hammer is especially suited for drywall installation because it has a ___.

A wrench, usually double-ended, that has a closed socket that fits over the head of a bolt.