FINAL OSHA 2

What are the ways an employer can protect workers from falls?

As a load is mechanically lifted, the materials _____________.

For workers on scaffolds, fall protection must be provided if they are working __________ above a lower level.

A ladder must extend at least _____ above the work surface you are climbing onto.

What is the greatest hazard or risk for workers in excavating trenches?

It is the responsibility of the worker to wear the PPE provided to him.

In general, fall protection must be provided to construction workers who are working on surfaces with unprotected sides and edges which are _____ above the lower level.

A personal fall arrest system consists of:

What accounts for the largest number of cited violations which leads to the number one cause of deaths on a construction site?

What is the depth of a trench that would require protection such as shoring

Struck-by injuries are produced by forcible contact or impact between the injured person and a/n _______.

To prevent from being pinned between equipment or other objects, workers should avoid_________.

Which one is an example of a struck-by flying hazard?

How high should the top of guard rail be above the work surface?

A struck-by hazard can be described as anytime a worker __________.

Providing worker training on the safe use of the equipment being operated is the responsibility of the:

One way a worker can protect themselves while working on or near a construction zone is to

An OSHA compliance officer has the right to enter a job site at any time without any notification to the site manager.

Employers must protect workers from struck-by hazards by _________.

Who is capable of identifying existing or predictable hazards or unsafe work environments and has the authority to take prompt corrective measures?