4.2.4 Practice Questions

7 September 2022
4.7 (114 reviews)
14 test answers

Unlock all answers in this set

Unlock answers (10)
question
Ethernet 100BaseFX networks use what type of cabling?
answer
Fiber optic
question
Which of the following Ethernet standards uses fiber optic cabling? (Select two)
answer
100BaseFX 1000BaseLX
question
Your network follows the 100BaseTX specifications for Fast Ethernet. What is the maximum cable segment length allowed?
answer
100 meters
question
With an Ethernet 10BaseT network, the maximum cable length between a computer and the hub is:
answer
100 meters
question
You have been tasked with an Ethernet network. Your client needs to implement a very high-speed network backbone between campus buildings; some of which are around 300 m apart. Multimode fiber-optic cabling has been installed between buildings. Your client has asked that you use the existing cabling. Which Ethernet standard meets these guidelines? (Choose two)
answer
10GBaseSR 1000BaseSX
question
What type of cabling is used with 100BaseTX Fast Ethernet networks?
answer
Type 1A or Category 5 UTP
question
What topology is used with 100BaseTX Fast Ethernet networks? (Select two)
answer
Physical star/logical star Physical star/logical bus
question
Which of the following are requirements of the 1000BaseT Ethernet standards? (Select three)
answer
The cable length must be less that or equal to 100m RJ-45 connectors CAT 5 cabling
question
You are planning a network for an educational campus. Due to the size of the buildings and the distance between them, you have elected to use 10BaseFL hubs, cabling, and network interface cards. What is the maximum length for the network cable between a workstation and a hub?
answer
2000 meters
question
Which Gigabit Ethernet standard uses multimode fiber-optic cabling and supports network segments up to a maximum of 550 meters long?
answer
1000BaseSX
question
You have been tasked with designing a high-speed Ethernet network. Your client's building already has 150-ohm shielded twisted pair (STP) wiring installed. Due to budget constraints, they have asked you to reuse the existing wiring instead of installing new fiber-optic cabling. Which Ethernet standard could you implement in this situation?
answer
1000BaseCX
question
You would like to implement 10 Gbps Ethernet over a distance of 1 kilometer or greater. Which of the following would be the minimum requirement for the implementation? (Select two)
answer
Single mode fiber 10GBaseLR standards
question
Which of the following standards is used by SONET?
answer
10GBaseLW
question
You want to implement an Ethernet network at very long distances using fiber optic cables. Which standard and cable type would you choose? (Select two)
answer
Single mode fiber 1000BaseLX