Quiz #7 Material Storage

Which of the following is not a general requirement for safe material storage?

The regulation that states material must be stacked on level and solidly supported skills

The regulation that states non-compatible materials must be segregated in storage

The regulation that states all materials store in tiers must be stacked, racked, blocked, interlock , or otherwise secured to prevent sliding, falling or collapse

The regulation that states workers need to keep storage area free from accumulated materials that cause tripping, fires or explosions, or that may contribute to harboring rats and pests

The maximum height of a stack of bricks is _____ feet.

All materials stored in _____ must be stacked, racked, blocked, interlocked or otherwise secured to prevent sliding, falling or collapse.

Accumulated materials in storage area could cause:

Material handling tasks should be designed to minimize weight, range of motion and ______.

Employees should seek help lifting which of the following?

Solvent waste, oily rags and flammable liquids must be kept in fire-resistant covered containers

General requirements do not apply to slings used in conjunction with other material handling equipment for the movement of material by hosting.

Match the following description to the related factors that can contribute tow ire rope failure: The function of size, grade, and construction must be sufficient to accommodate the maximum load that will be applied to it:

Match the following description to the related factors that can contribute tow ire rope failure: In _____. eye splices must contain at least four full tucks and short splices must contain at least eight full tucks (four on each side of the center line of the splice).

Match the following description to the related factors that can contribute tow ire rope failure: In order to prolong the life of the sling and protect the lives of employees, the manufacturer's suggestion for safe and proper use of wire rope slings must be strictly adhered to

Match the following description to the related factors that can contribute tow ire rope failure: A wire rope must have the ability to withstand repeated bending without the failure of the wires from fatigue

In _____, eye splices must contain at least four full tucks and short splices must contain at least eight full tucks (four on each side of the center line of the splice).

Higher safe working loads are permissible when recommended by the manufacturer for specific, identifiable products, provided that a safety factor of not less than 5 is maintained.

Rigging equipment for material handling must be inspected:

Attachments such as shop hooks, makeshift fasteners or rods may be used on steel chain slings based on the manufacturer's approval.

The best way to prevent wire rope failure due to the development of small cracks is to:

The temperature range for the unsafe use of natural and synthetic rope slings is -20 F to 180 F except for:

Polypropylene web slings may be used at temperatures higher than that of natural fiber slings.

Loads on forklifts must be _____.

Which of the follow are required features of a dock board?

To offset an overload, extra weight should be placed on the rear of the forklift.

Modifications may be made to cranes at the discretion of the employer

In this case study, the Lockout/Tagout standard would require that the crane be secured from movement, and that hydraulic or pneumatic lines that could be come energized be _____.

If the employee had referred to his employer's lockout/tagout procedure checklist, the likelihood of the employee's survival would have increased.

Which of the Skid-Steer Loader' safety systems were disabled, resulting in 100 injuries and fatalities

Which of the following is a safety feature required in all earthmoving equipment?

Employee health screenings are one of the four main elements of an effective occupational safety and health program?

Which of the following is not one of the four main elements of an effective occupational safety and health program?

Training should emphasize factors that will contribute to reducing the overall weight of loads that need to be handled.

Safe lifting training can help prevent back injuries caused by improper technique.

Ergonomics include:

Which of the following is an injury that can be caused by ergonomic hazards?

A wire rope sling with a strength of 10,000 pounds and a total working load of 2,000 pounds has a design factor (multiplier) of:

When disposal materials are dropped more than 20 feet to an exterior location, an enclosed chute must be used.

When using industrial fork-lifts, the load must be at the lowest position for traveling, and the truck manufacturer's operational requirements must be followed.

Maximum safe load limits of _____ must be posted within buildings and structures.

Used lumber must have which of the following withdrawn before stacking?

Which of the following is the principal source of compensable injuries in the American work force?

Which of the following is required for inclusion on a synthetic webbing label?

When traveling on a fork lift, the carried load must be at the highest feasible position during travel

Safe lifting training should include:

General requirements do not apply to slings used in conjunction with other material handling equipment for the movement of material by hoisting