Chapter 6 Managing Quality

3) Which of the following statements regarding Arnold Palmer Hospital is FALSE? A) The hospital uses a wide range of quality management techniques. B) The culture of quality at the hospital includes employees at all levels. C) The hospital scores very highly in national studies of patient satisfaction. D) The hospital's high quality is measured by low readmission rates, not patient satisfaction. E) The design of patient rooms, even wall colors, reflects the hospital's culture of quality.

4) Arnold Palmer Hospital uses which of the following quality management techniques? A) Pareto charts B) flowcharts C) benchmarking D) just-in-time E) The hospital uses all of the above techniques.

5) Companies with the highest levels of quality are how many times more productive than their competitors with the lowest quality levels? A) 2 B) 3 C) 4 D) 5 E) None of the above because quality has no impact on productivity (units/labor hr.).

6) A successful quality strategy features which of the following elements? A) an organizational culture that fosters quality B) an understanding of the principles of quality C) engaging employees in the necessary activities to implement quality D) A and C E) A, B, and C

7) Quality can improve profitability by reducing costs. Which of the following is not an aspect of reduced costs by quality improvements? A) flexible pricing B) increased productivity C) lower rework and scrap costs D) lower warranty costs E) All of the above are aspects of reduced costs by quality improvements. quality

7) "Quality lies in the eyes of the beholder" is: A) an unrealistic definition of quality. B) a user-based definition of quality. C) a manufacturing-based definition of quality. D) a product-based definition of quality. E) the definition of quality proposed by the American Society for Quality.

8) "Making it right the first time" is: A) an unrealistic definition of quality. B) a user-based definition of quality. C) a manufacturing-based definition of quality. D) a product-based definition of quality. E) the definition of quality proposed by the American Society for Quality

9) Three broad categories of definitions of quality are: A) product quality, service quality, and organizational quality. B) user based, manufacturing based, and product based. C) internal, external, and prevention. D) low-cost, response, and differentiation. E) Pareto, Shewhart, and Deming.

10) According to the manufacturing-based definition of quality: A) quality is the degree of excellence at an acceptable price and the control of variability at an acceptable cost. B) quality depends on how well the product fits patterns of consumer preferences. C) even though quality cannot be defined, you know what it is. D) quality is the degree to which a specific product conforms to standards. E) quality lies in the eyes of the beholder.

11) Which of the following is NOT one of the major categories of costs associated with quality? A) prevention costs B) appraisal costs C) internal failure costs D) external failure costs E) None of the above; they are all major categories of costs associated with quality.

12) All of the following costs are likely to decrease as a result of better quality EXCEPT: A) customer dissatisfaction costs. B) inspection costs. C) scrap costs. D) warranty and service costs. E) maintenance costs.

13) Which of the four major categories of quality costs is particularly hard to quantify? A) prevention costs B) appraisal costs C) internal failure costs D) external failure costs E) None is hard to quantify.

14) GE's recall of 3.1 million dishwashers cost the company more in repairs than the value of the actual dishwashers. This is an example of which quality principle? A) PDCA B) internal failure costs C) appraisal costs D) cost of poor quality is underestimated E) prevention costs

15) Which of the following statements is NOT true? A) Self-promotion is not a substitute for quality products. B) Inferior products harm a firm's profitability and a nation's balance of payments. C) Product liability transfers from the manufacturer to the retailer once the retailer accepts delivery of the product. D) Quality-be it good or bad-will show up in perceptions about a firm's new products, employment practices, and supplier relations. E) Legislation such as the Consumer Product Safety Act sets and enforces product standards by banning products that do not reach those standards.

11) The philosophy of zero defects is: A) the result of Deming's research. B) unrealistic. C) prohibitively costly. D) an ultimate goal; in practice, 1 to 2% defects is acceptable. E) consistent with the commitment to continuous improvement.

12) Based on his 14 Points, Deming is a strong proponent of: A) inspection at the end of the production process. B) an increase in numerical quotas to boost productivity. C) looking for the cheapest supplier. D) training and knowledge. E) all of the above.

19) If 1 million passengers pass through the St. Louis Airport with checked baggage each month, a successful Six Sigma program for baggage handling would result in how many passengers with misplaced luggage? A) 3.4 B) 6.0 C) 34 D) 2700 E) 6 times the monthly standard deviation of passengers

21) Total quality management emphasizes: A) the responsibility of the quality control staff to identify and solve all quality-related problems. B) a commitment to quality that goes beyond internal company issues to suppliers and customers. C) a system where strong managers are the only decision makers. D) a process where mostly statisticians get involved. E) ISO 14000 certification.

22) A successful TQM program incorporates all EXCEPT which of the following? A) continuous improvement B) employee involvement C) benchmarking D) centralized decision-making authority E) JIT

26) Techniques for building employee empowerment include: A) building communication networks that include employees. B) developing open, supportive supervisors. C) moving responsibility from both managers and staff to production employees. D) building high-morale organizations. E) All of the above are techniques for employee empowerment.

27) Building high-morale organizations and building communication networks that include employees are both elements of: A) ISO 9000 certification. B) Six Sigma certification. C) employee empowerment. D) Taguchi methods. E) the tools of TQM.

28) The process of identifying other organizations that are best at some facet of your operations and then modeling your organization after them is known as: A) continuous improvement. B) employee empowerment. C) benchmarking. D) copycatting. E) patent infringement.

29) Costs of dissatisfaction, repair costs, and warranty costs are elements of cost in the: A) quality loss function. B) Pareto chart. C) ISO 9000 quality cost calculator. D) process chart. E) Ishikawa diagram. *not sure the answer to this question

30) A quality loss function includes all of the following costs EXCEPT: A) the cost of scrap and repair. B) the cost of customer dissatisfaction. C) inspection, warranty, and service costs. D) sales costs. E) costs to society.

6) The process improvement technique that sorts the vital few from the trivial many is: A) Taguchi analysis. B) Pareto analysis. C) benchmarking. D) Deming analysis. E) Yamaguchi analysis.

7) A production manager at a pottery factory has noticed that about 70 percent of defects result from impurities in raw materials, 15 percent result from human error, 10 percent from machine malfunctions, and 5 percent from a variety of other causes. This manager is most likely using: A) a Pareto chart. B) a scatter diagram. C) a quality loss function. D) a cause-and-effect diagram. E) a flowchart.

8) A customer service manager at a retail clothing store has collected numerous customer complaints from the forms they fill out on merchandise returns. To analyze trends or patterns in these returns, she has organized these complaints into a small number of sources or factors. This is most closely related to the ________ tool of TQM. A) quality loss function B) cause-and-effect diagram C) scatter diagram D) histogram E) process control chart

9) A fishbone chart is also known as a: A) cause-and-effect diagram. B) poka-yoke diagram. C) Kaizen diagram. D) Kanban diagram. E) Taguchi diagram.

10) If a sample of parts is measured and the mean of the measurements is outside the control limits, the process is: A) in control, but not capable of producing within the established control limits. B) out of control and the process should be investigated for assignable variation. C) within the established control limits with only natural causes of variation. D) monitored closely to see if the next sample mean will also fall outside the control limits. E) none of the above.

11) A quality circle holds a brainstorming session and attempts to identify the factors responsible for flaws in a product. Which tool do you suggest they use to organize their findings? A) Ishikawa diagram B) Pareto chart C) flowchart D) control charts E) activity chart

12) When sample measurements falls inside the control limits, it means that: A) each unit manufactured is good enough to sell. B) the process limits cannot be determined statistically. C) the process output exceeds the requirements. D) if there is no other pattern in the samples, the process is in control. E) the process output does not fulfill the requirements.

13) Which of the following is FALSE regarding control charts? A) Values above the upper control limits imply that the product's quality is exceeding expectations. B) Control charts are built so that new data can be quickly compared to past performance data. C) Control charts graphically present data. D) Control charts plot data over time. E) None of the above is false.

3) What refers to training and empowering frontline workers to solve a problem immediately? A) just-in-time B) poka-yoke C) benchmarking D) kaizen E) service recovery

4) A recent consumer survey conducted for a car dealership indicates that, when buying a car, customers are primarily concerned with the salesperson's ability to explain the car's features, the salesperson's friendliness, and the dealer's honesty. The dealership should be ESPECIALLY concerned with which determinants of service quality? A) communication, courtesy, and credibility B) competence, courtesy, and security C) competence, responsiveness, and reliability D) communication, responsiveness, and reliability E) understanding/knowing customer, responsiveness, and reliability

5) Marketing issues such as advertising, image, and promotion are important to quality because: A) they define for consumers the tangible elements of a service. B) the intangible attributes of a product (including any accompanying service) may not be defined by the consumer. C) they educate consumers on how to use the product. D) they make the product seem more valuable than it really is. E) they raise expenses and therefore decrease profitability.

6) Which of the determinants of service quality involves having the customer's best interests at heart? A) access B) courtesy C) credibility D) responsiveness E) tangibles

7) Which of the determinants of service quality involves performing the service right the first time? A) access B) courtesy C) credibility D) reliability E) responsiveness