00-20-1

List the symbols in order of seriousness

A Red X indicates what?

A Red Dash symbol indicates?

When an aerospace vehicle is due PDM. After ____________, upgrade the Red Dash to a Red X, unless an extension has been obtained from the appropriate SM.

A Red Diagonal indicates?

______________ will be a straight line from the lower left to the upper right corner of the symbol block.

___________ discrepancies are signed off by the individual who accomplishes the inspection/corrective action by entering their last name initial in black over the symbol in the symbol block and their minimum signature in the "INSPECTED BY" block.

_____________ discrepancies are signed off by the individual who accomplishes the corrective action by entering their last name initial in black over the symbol in the symbol block and their minimum signature in the "CORRECTED BY" block.

How is a Red Dash is upgraded to a Red X?

Can Symbols/initials be erased even if entered in error?

When an initial is entered in error, clear the discrepancy IAW?

When can you downgrade X for a one time flight?

is the source document for recording individual flying time, sorties and/or events for input into the MIS and ARMS.

Maintenance or aircrew trainer technician/operator will complete what blocks on AFTO FORM 781?

MDS." Enter the mission, design and series (MDS) designators from block 12 of the AFTO Form 781F.

SERIAL NUMBER." Enter the aerospace vehicle serial number. Example: 85-11428, 65-0966.

"Unit CHARGED FOR FLY HOURS/HOSM-CODE." Enter the organization to which the aerospace vehicle is possessed, with the command designation in parenthesis (e.g., 374 AW (AMC). Enter the four-letter code of the Host Operation System Management (HOSM) which services the organization, (supplied by the unit operations officer) to which the original forms must be sent for processing and filing.

"LOCATION." Enter the base to which the aerospace vehicle is assigned.

Who will ensure completion of all other blocks required by AFI 11-401

Who will complete block 39, "MAINT. REVIEW" to show the form was reviewed and the data was entered into MIS. Send completed form to unit operations.

Who will complete block 41 in accordance with AFI 11-401.

Use the ___________ to document each discrepancy discovered. For aircraft that have sustained battle damage see TO 1-1H-39, General Aircraft Battle Damage Repair (ABDR) for documentation procedures.

Use the ____________, when COMSEC equipment is installed on the aerospace vehicle

is always displayed at the front of the AFTO Form in the 781-series binder

contains basic information to serve as an aid in making entries on the AFTO FORM 781. If used, file in the rear of the binder.

the _________ to document maintenance status, servicing information, and to provide a ready reference as to the status of aerospace vehicles or ATDs.

Who will check the servicing entries recorded in block 11 "SERVICING DATA" to verify that the quantities are adequate for the flight.

Who documents the airframe time, full stop landings, total landings, cartridge/JFS starts, and engine cycles, as required, in blocks 9, 10, 11 and 12 of the AFTO Form 781H?

For engines equipped with Engine Monitoring Systems (EMS) such as F100, F110, TF34, T701C, etc. use of the ______________

contains basic information to serve as an aid in making entries on the AFTO FORMS 781A and 781K. If used, this form is inserted in a clear page holder and placed at the rear of the binder.