MIX 373 Exam 2 CH6

25 July 2022
4.7 (114 reviews)
64 test answers

Unlock all answers in this set

Unlock answers (60)
question
Key aspects of the process selection challenge include _________ and __________. A. information technology; marketing strategy B. process flexibility; marketing strategy C. capital intensity; process flexibility D. marketing strategy; operations strategy E. capacity planning; marketing strategy
answer
C. capital intensity; process flexibility
question
When new products or services are being planned, process selection occurs as a matter of course. Process selection also comes into play as a result of: (I) technological changes. (II) competitive pressures. (III) fundamental changes in demand patterns. A. I only B. II only C. III only D. I and II but not III E. I, II, and III
answer
E. I, II, and III
question
Process choice is _________ driven. A. demand B. operations C. marketing D. process E. capacity
answer
A. demand
question
The key questions in the process selection task are: (I) How will the product/service be priced? (II) How much variety will be imposed on the process? (III) What is the target market for the product/service? (IV) At what volume will the process need to operate? A. I and III B. II and IV C. II and III D. I and IV E. III and IV
answer
B. II and IV
question
Job shops tend to be __________ while continuous processes tend to be __________. A. in services; in manufacturing B. short-term and capital intensive; long-term and labor intensive C. small scale and flexible; large-scale and inflexible D. standardized; customized E. low cost-per-unit; high cost-per-unit
answer
C. small scale and flexible; large-scale and inflexible
question
The estimation of costs is generally most difficult when the ___________ process has been chosen. A. project B. repetitive C. continuous D. batch E. job shop
answer
E. job shop
question
In an environment in which demand is both substantial and stable, __________ technology tends to be the best choice. A. batch production B. fixed automation C. project production D. programmable automation E. flexible automation
answer
B. fixed automation
question
Computer-integrated manufacturing integrates ______________ with manufacturing. A. information from across the organization B. demand forecasts C. marketing strategy D. human resources E. inventory levels
answer
A. information from across the organization
question
Which of the following is not a process commonly considered in making products or delivering services? A. continuous B. batch C. repetitive D. job shop E. subcontracting
answer
E. subcontracting
question
The type of processing system which is used for highly standardized products is: A. continuous. B. intermittent. C. project. D. batch. E. unit.
answer
A. continuous
question
Cellular layout is a term associated with: A. wireless telecommunication. B. part families. C. functional (or process) layouts. D. assembly lines. E. job shops.
answer
B. part families
question
The substitution of machinery that has sensing and control devices for human labor is best described by the term: A. automation. B. feedback control. C. computer-aided manufacturing. D. computer-integrated manufacturing. E. flexible manufacturing system.
answer
A. automation
question
Computer-aided manufacturing refers to the use of computers in: A. product design. B. decision making. C. data analysis. D. quality control. E. process control.
answer
E. process control
question
A group of machines including supervisory computer control, automatic material handling, and possibly robots is called: A. computer-aided design. B. a manufacturing cell. C. computer-aided manufacturing. D. computer-integrated manufacturing. E. a flexible manufacturing system.
answer
E. a flexible manufacturing system.
question
In which type of operation are you likely to see, at most, only minor variations in the product or service being produced using the same process and the same equipment? A. a project B. a job shop C. repetitive production D. batch processing E. intermittent production
answer
C. repetitive production
question
The process of assigning tasks to workstations in such a way that the workstations have approximately equal time requirements is called: A. fair employment practices. B. idle time analysis. C. line balancing. D. cycle time optimization. E. capacity cycling.
answer
C. line balancing.
question
An operations strategy for process selection should recognize that: A. process selection seldom requires technical expertise. B. engineering "white elephants" are uncommon. C. there is little need to manage technology. D. flexibility is not always the best choice. E. most technical skills can be contracted out to consultants.
answer
D. flexibility is not always the best choice.
question
Layout planning is required because of: (I) efficient operations. (II) accidents or safety hazards. (III) new products or services. (IV) morale problems. A. I and II B. II and IV C. I and III D. II, III, and IV E. I, II, III, and IV
answer
D. II, III, and IV
question
The advantages of automation include: (I) reduced output variability. (II) reduced variable costs. (III) machines don't strike or file grievances. (IV) machines are always less expensive than human labor. A. I and IV B. II and III C. I, II, and III D. I and III E. II and IV
answer
D. I and III
question
As compared to rigid automation, the benefits of flexible manufacturing systems include: A. reduced labor requirements. B. higher efficiency. C. larger batch sizes. D. significantly lower fixed costs. E. significantly lower variable costs.
answer
D. significantly lower fixed costs.
question
Which type of processing system tends to produce the most product variety? A. assembly B. job shop C. batch D. continuous E. project
answer
B. job shop
question
In which type of processing system would gasoline be produced from crude oil? A. job shop B. batch C. assembly D. continuous E. project
answer
D. continuous
question
Which of the following is not a characteristic of layout decisions in system design? A. substantial investment of both money and effort B. long-term commitment C. significant impact on short-term efficiency D. usually well received by operative personnel E. can affect supplier or customer processes
answer
D. usually well received by operative personnel
question
An example of automated services is: A. online banking. B. build your own pizza. C. haircuts. D. massage parlors. E. financial advising.
answer
A. online banking.
question
Which one of the following is not common to product layouts? A. a high rate of output B. specialization of labor C. low unit costs D. ability to adjust to changes in demand E. special-purpose technology
answer
D. ability to adjust to changes in demand
question
Which one of the following is not considered an important factor in service layout design? A. cost minimization and product flow B. frequency of orders C. customer attitude and image D. intensity of contact with the customer E. customer preferences with regard to variety
answer
A. cost minimization and product flow
question
The type of layout which features departments or other functional groupings in which similar activities are performed is: A. process. B. product. C. fixed-position. D. mass. E. unit.
answer
A. process.
question
Which of the following is not true about process layouts when they are compared to product layouts? A. higher in-process inventories B. lower span of supervision C. lower rates of output D. more involved cost accounting E. lower unit costs
answer
E. lower unit costs
question
The type of layout in which workers, materials, and equipment are moved to the product as needed is: A. process. B. product. C. fixed-position. D. batch. E. mass.
answer
C. fixed-position.
question
The grouping of equipment by the operations needed to perform similar work for part families is: A. product layout. B. cellular manufacturing layout. C. functional layout. D. fixed-position layout. E. process layout.
answer
B. cellular manufacturing layout.
question
Which term is most closely associated with cellular manufacturing? A. part families B. assembly line C. robotics D. CAD E. CAM
answer
A. part families
question
Laser technology used in surgical procedures is an example of technological advances in: A. product. B. facility layout. C. process. D. information. E. reverse engineering.
answer
C. process.
question
Product profiling links key product or service requirements to: A. market conditions. B. order sizes. C. pricing strategies. D. schedule changes. E. process capabilities.
answer
E. process capabilities.
question
Layout design has many objectives, one of which is: A. reduce bottlenecks. B. move materials and workers simultaneously. C. use workers and space efficiently. D. hold material handling costs to 27 percent or less. E. install computer terminals every 500 feet.
answer
C. use workers and space efficiently.
question
Which phrase most closely describes flexible manufacturing systems? A. a variation of CAD B. a more fully automated version of cellular manufacturing C. manufacturing resource planning D. a process layout with a manufacturing overlay E. an approach that allows workers to begin work at a time of their choosing
answer
B. a more fully automated version of cellular manufacturing
question
A service organization (for example, a hospital) is likely to use a(n) ________ layout because of variability in customer processing requirements. A. project B. process C. flow D. assembly E. nonrepetitive
answer
B. process
question
In a product layout, the task of deciding how to assign work to specific stations is referred to as: A. process balancing. B. task allocation. C. line balancing. D. work allocation. E. station balancing.
answer
C. line balancing.
question
The minimum possible cycle time in a product layout is determined by the: A. longest task time. B. shortest task time. C. average task time. D. total task time. E. per-unit setup time.
answer
A. longest task time.
question
A production line is to be designed for a job with three tasks. The task times are .4 minutes, 1.2 minutes, and .5 minutes. The maximum cycle time in minutes is: A. .3. B. .7. C. 1.4. D. 2.1. E. .8.
answer
D. 2.1.
question
A production line is to be designed for a job with three tasks. The task times are .3 minutes, 1.4 minutes, and .7 minutes. The minimum cycle time in minutes is: A. .3. B. .7. C. 1.4. D. 2.4. E. .8.
answer
C. 1.4.
question
Daily capacity of a product layout is determined by: A. cycle time divided by operating time. B. operating time divided by cycle time. C. operating time divided by total task time. D. total task time divided by cycle time. E. cycle time divided by total task time.
answer
B. operating time divided by cycle time.
question
The maximum allowable cycle time is computed as: A. daily operating time divided by the desired output. B. desired output divided by the daily operating time. C. daily operating time divided by the product of the desired output and the sum of job times. D. the product of desired output and the sum of job times divided by daily operating time. E. 1.00 minus station time.
answer
A. daily operating time divided by the desired output.
question
If a line is balanced with 80 percent efficiency, the "balance delay" will be: A. 20 percent. B. 80 percent. C. 100 percent. D. unknown, since balance delay is not related to efficiency. E. depends on the next operation.
answer
A. 20 percent.
question
The main issue in the design of process layouts for service operations concerns the relative positioning of: A. workstations. B. processing components. C. departments. D. entrances, loading docks, etc. E. manufacturing cells.
answer
C. departments.
question
Which of the following is not an information requirement for the design of a process layout? A. a list of departments or work centers B. a projection of work flows between the work centers C. the distance between locations D. the cost per unit of distance to move loads E. a list of product cycle times for every product manufactured
answer
E. a list of product cycle times for every product manufactured
question
Which of the following is not an approach that companies use to achieve a smooth flow of production? A. line balancing heuristics B. parallel workstations C. dynamic line balancing (cross-training workers) D. mixed model line E. Companies use all of these.
answer
E. Companies use all of these.
question
A common goal in designing process layouts is: A. minimizing the number of workers. B. minimizing idle time. C. minimizing transportation costs. D. maximizing workstation productive time. E. maximizing transportation distances.
answer
C. minimizing transportation costs.
question
In the use of closeness ratings for process layouts, the code U means the closeness between two departments is: A. (U)nknown. B. (U)nusually important. C. of (U)sual importance. D. (U)nimportant. E. (U)ndesirable.
answer
D. (U)nimportant.
question
Which closeness rating reflects the undesirability of having two departments located near each other? A. A B. E C. I D. U E. X
answer
E. X
question
Which closeness rating reflects the highest importance for two departments being close to each other? A. A B. E C. I D. U E. X
answer
A. A
question
Which closeness rating reflects the highest importance for two departments being close to each other? A. A B. E C. I D. U E. X
answer
D.u
question
Which closeness rating reflects indifference on the nearness or lack of nearness of two departments? A. A B. E C. I D. U E. X
answer
D. U
question
Heuristic rules are used primarily in which of these types of layouts? (I) Product (II) Process (III) Fixed-position A. I B. II C. I and III D. I and II E. II and III
answer
D. I and II
question
Heuristic rules are usually applied when: A. an optimum is necessary. B. a computer program is unavailable. C. a problem has a small number of alternatives. D. a problem has a large number of alternatives. E. other approaches have failed.
answer
D. a problem has a large number of alternatives.
question
An advantage of a U-shaped production line is that: A. it is less compact. B. communication is reduced among employees. C. workers are specialists. D. work assignments are more rigid. E. it is more efficient than a traditional product layout.
answer
E. it is more efficient than a traditional product layout.
question
Which of these items would be most likely to be made with a fixed-position layout? A. a Boeing 777 jet aircraft B. applesauce C. a computer chip D. toothpaste E. all of these
answer
A. a Boeing 777 jet aircraft
question
A product-focused, single-piece flow, pull production system would be called a: A. cellular layout. B. job shop. C. assembly line. D. nonrepetitive process. E. continuous flow.
answer
A. cellular layout.
question
Which one of these is a tool used to tell a machine the details of the operations to be performed? A. CNC B. CIM C. CAD D. CAM E. automation
answer
A. CNC
question
Which of the following is not a primary concern for process selection? A. variety in products/services B. flexibility of equipment C. volume of output D. pricing strategy E. changeover costs
answer
D. pricing strategy
question
Which of the following process types would be most likely to be used in the introductory phase of a product's life cycle? A. continuous B. intermittent C. project D. batch E. job shop
answer
E. job shop
question
Which of the following process types would be most likely to be used in the maturity phase of a product's life cycle? A. repetitive B. intermittent C. project D. batch E. job shop
answer
A. repetitive
question
What is it about job shops that make them appropriate for products in the introductory phase of their life cycle? A. efficiency B. technology C. flexibility D. high volume capacity E. rigidity
answer
C. flexibility
question
What is it about repetitive processes that make them appropriate for products in the maturity phase of their life cycle? A. efficiency B. general-purpose technology C. possible variety D. low risk E. flexibility
answer
A. efficiency
question
Although they do not guarantee optimal solutions, ______________ are useful in finding reasonable solutions when the number of possible options is overwhelming. A. cellular layouts B. heuristics C. logistics D. CAM E. CAD
answer
B. heuristics