Ch 8 Network

Network segmentation decreases both performance and security on a network.

Only Class B and Class C networks can be subnetted.

By default, the native VLAN is the same as the default VLAN.

A native VLAN mismatch occurs when two access ports that are connected to each other are both tagging traffic with different VLAN IDs.

All that is needed to provide communication between two VLANs is a DHCP relay agent.

Network segmentation at Layer 2 of the OSI model is accomplished using VLANs.

A /24 CIDR block (prefix) is equivalent to a 255.255.255.0 subnet mask.

IPv6 addressing does not utilize classful addressing, therefore every IPv6 address is classless.

An unmanaged switch can still support the creation of VLANs, provided there is an interface for configuration.

In order to identify the transmissions that belong to each VLAN, a switch will add a tag to Ethernet frames that identifies the VLAN through which they arrive at the switch.

A network with a CIDR notation (prefix) of /26 would have what subnet mask?

A network with 10 bits remaining for the host portion will have how many usable host addresses?

An interface that manages traffic from multiple VLANs is known by what term?

Which of the following suggestions can help prevent VLAN hopping attacks on a network?

With VTP, where is the VLAN database stored?

What IEEE standard specifies how VLAN information appears in frames and how switches interpret that information?

In an IPv6 address, what do the first four blocks or 64 bits of the address represent?

When an 802.1Q tag is added to an Ethernet frame, where is it placed?

How large is the 802.1Q tag that is added to an Ethernet frame when using VLANs?

You are working on a Cisco switch and need to learn what VLANs exist on the switch. Which command will list the current VLANs recognized by the switch?

Given a host IP address of 172.16.1.154 and a subnet mask of 255.255.254.0, what is the network ID for this host?

What is the maximum number of host IP addresses that can exist in a Class B network?

Which of the following terms is commonly used to describe a VLAN configuration in which one router interface connects to a switch and serves as the gateway for multiple VLANs?

A subnet of 255.255.248.0 can be represented by what CIDR notation?

When using IPv6, what would a /64 network likely be assigned to?

What does the VLAN Trunk Protocol (VTP) do?

Which of the following statements regarding IPv6 subnetting is NOT accurate?

If the EUI-64 standard is used, what part of an IPv6 address is affected?

What is NOT one of the ways in which networks are commonly segmented?

An IP address of 192.168.18.73/28 has what network ID?

You have been tasked with the creation and design of a network that must support a minimum of 5000 hosts. Which network accomplishes this goal?

How many subnets can a /48 site prefix support?

What subnet mask can be used to segment the 172.16.0.0 network to allow for a minimum of 6 subnets while maximizing the number of hosts per subnet?