5.1.10 Practice Questions (TO)

You recently created a new network segment for Development. Because the hosts are now on a different network segment, they can no longer contact DHCP server. Both network segments are connected wia a Cisco router. Which of the following would be the best action to take in order to fix the problem?

You have a workstation connected to a small branch network using a single switch. The network using a single switch. The network does not have any routers and is not connected to the Internet. What are the minimum configuration parameters required on the workstation to be able to communicate with all hosts on the network?

Which of the following is the last IP address that can be assigned to hosts on the 166.70.0.0 network using the default subnet mask?

Your network has been assigned the class C network address 200.78.151.0 Which of the following addresses can be assigned to hosts on your network? (3 answers)

Your network has been assigned a class B network address of 179.113.0.0 Which three of the following addresses can be assigned to hosts on your network?

Assuming the network is indicated by the default portion of the IP address, which three of the following IP addresses belong to the class A network 114.0.0.0? (3)

A host on the network has an IP address of 129.11.99.78 using the default subnet mask, how would you identify the address and mask using CIDR notation?

Which of the following best describes the purpose of using subnets?

Which of the following terms are often synonymous with or made possible with CIDR? (2 answers)

You've decided to use a subnet mask of 255.255.192.0 on the 172.17.0.0 network to create four seperate subnets. Which network IDs will be assigned to these subnets in this configuration? (2 answers)

You have a small network connected to the Internet as shown in the exhibit. You need to configure the default gateway address on Wrk1 so that is can communicate with hosts on the Internet. Which address would you use for the default gateway address?

You have a small network as shown, you have configured the IP address and subnet mask on wrk1. You want to be able to use wrk1 to browse the Internet to connect to sites like cisco.com Which other parameters are required on the workstation? (2 answers)

You have a small network with a single subnet connected to the Internet as shown in the Exhibit. The router has been assigned the 2 addresses shown. You need to manually configure the workstation to connect to the network. The workstation should use RouterA as the default gateway and DNS1 as the DNS server address. From the drop-down options, select the appropriate parameters to configure the workstations TCP/IP settings.

You manage a subnet that uses subnet address 198.162.1.0/23 Which of the following best describes how addressing is configured for the subnet?

You manage a server that uses an IP address of 192.168.255.188 with a mask of 255.255.0.0 Which of the following describes the address type?