You need to transfer data from one laptop to another and would like to use an Ethernet cable. You do not have a hub or a switch. Which type of cable should you use?
answer
Crossover Explanation: If you need to transfer data from one laptop to another using an Ethernet cable, you should use a crossover cable. A crossover cable is a type of Ethernet cable that is used to connect two devices that are not connected to a network.
question
You want the LAN port on a router to the uplink port on a switch. The switch does not support auto-MDI. Which type of cable should you use?
answer
Crossover
question
You have two switches that you need to connect using their uplink ports. The switches do not support auto-MDI. which type of cable should you use?
answer
Crossover
question
You need to connect a workstation to a switch using a regular port on the switch (not an uplink port). The switch does not support auto-MDI. Which type of cable should you use?
answer
Straight-through
question
You have purchased a new router that you need to configure. You need to connect a workstation to the router's console port to complete the configuration tasks. Which type of cable would you most likely use?
answer
Rollover
question
Which of the following connectors is typically used on one end of the rollover cable?
answer
Serial Explanation: The rollover cable typically has a connector on one end that is used for connecting to devices. This connector is typically an RJ-45 connector.
question
Which of the following standards is typically used in a rollover cable?
answer
RS-232
question
Use the exhibit to match the connector type on the corresponding letter on the right.
answer
A=DB-25
B=DB-9
C=RJ45
D=RJ11
E=LC
F=BNC
G=F-Type Explanation: The exhibit shows eight different types of connectors, labeled A through H. The question asks the test-taker to match each connector type with the corresponding letter on the right.Connector type A is a D-subminiature connector, which is used for connecting computer peripherals such as keyboards and mice. Connector type B is an Ethernet connector, which is used for connecting computer networks. Connector type C is a USB connector, which is used for connecting computer peripherals such as printers and scanners. Connector type D is a FireWire connector, which is used for connecting digital video cameras. Connector type E is an HDMI connector, which is used for connecting digital televisions and other video devices. Connector type F is a DisplayPort connector, which is used for connecting digital monitors. Connector type G is a Thunderbolt connector, which is used for connecting high-speed data devices such as hard drives and solid state drives. Connector type H is a proprietary connector, which is used for connecting special devices that are not compatible with any other type of connector.
question
You want to create a rollover cable that has an RJ-45 connector on both ends. How should you connect the wires within the connectors?
answer
Connect pin 1 to pin 8, pin 2 to pin 7, pin 3 to pin 6, and pin 4 to pin 5
question
You are implementing a SOHO network for a local business. The ISP has already installed and connected a cable modem in the business. The business has four computers that need to communicate with each other and the internet. The ISP's cable modem has only one RJ45 port. You need to set up the network with the following in mind: Spend as little money as possible, do not purchase unnecessary equipment, computers need to have a gigabit connection to the network, and new devices should not require management or configuration. You examine each computer and notice only one of the four computers has a wireless NIC; they all have Ethernet NICs. What should you purchase?
answer
An unmanaged switch and CAT5e cabling
question
You manage the two-location network shown in the exhibit. Workstations and servers at each location connect to a patch panel using behind-the-wall wiring. The patch panel then connects network hosts to one of three 1000BASE-T switches. Routers are implemented at each location together using a private WAN. The switch ports have auto-MDIX disabled.
You need to transfer data from one laptop to another and would like to use an Ethernet cable. You do not have a hub or a switch. Which type of cable should you use?
answer
Crossover Explanation: If you need to transfer data from one laptop to another using an Ethernet cable, you should use a crossover cable. A crossover cable is a type of Ethernet cable that is used to connect two devices that are not connected to a network.
question
You want the LAN port on a router to the uplink port on a switch. The switch does not support auto-MDI. Which type of cable should you use?
answer
Crossover
question
You have two switches that you need to connect using their uplink ports. The switches do not support auto-MDI. which type of cable should you use?
answer
Crossover
question
You need to connect a workstation to a switch using a regular port on the switch (not an uplink port). The switch does not support auto-MDI. Which type of cable should you use?
answer
Straight-through
question
You have purchased a new router that you need to configure. You need to connect a workstation to the router's console port to complete the configuration tasks. Which type of cable would you most likely use?
answer
Rollover
question
Which of the following connectors is typically used on one end of the rollover cable?
answer
Serial Explanation: The rollover cable typically has a connector on one end that is used for connecting to devices. This connector is typically an RJ-45 connector.
question
Which of the following standards is typically used in a rollover cable?
answer
RS-232
question
Use the exhibit to match the connector type on the corresponding letter on the right.
answer
A=DB-25
B=DB-9
C=RJ45
D=RJ11
E=LC
F=BNC
G=F-Type Explanation: The exhibit shows eight different types of connectors, labeled A through H. The question asks the test-taker to match each connector type with the corresponding letter on the right.Connector type A is a D-subminiature connector, which is used for connecting computer peripherals such as keyboards and mice. Connector type B is an Ethernet connector, which is used for connecting computer networks. Connector type C is a USB connector, which is used for connecting computer peripherals such as printers and scanners. Connector type D is a FireWire connector, which is used for connecting digital video cameras. Connector type E is an HDMI connector, which is used for connecting digital televisions and other video devices. Connector type F is a DisplayPort connector, which is used for connecting digital monitors. Connector type G is a Thunderbolt connector, which is used for connecting high-speed data devices such as hard drives and solid state drives. Connector type H is a proprietary connector, which is used for connecting special devices that are not compatible with any other type of connector.
question
You want to create a rollover cable that has an RJ-45 connector on both ends. How should you connect the wires within the connectors?
answer
Connect pin 1 to pin 8, pin 2 to pin 7, pin 3 to pin 6, and pin 4 to pin 5
question
You are implementing a SOHO network for a local business. The ISP has already installed and connected a cable modem in the business. The business has four computers that need to communicate with each other and the internet. The ISP's cable modem has only one RJ45 port. You need to set up the network with the following in mind: Spend as little money as possible, do not purchase unnecessary equipment, computers need to have a gigabit connection to the network, and new devices should not require management or configuration. You examine each computer and notice only one of the four computers has a wireless NIC; they all have Ethernet NICs. What should you purchase?
answer
An unmanaged switch and CAT5e cabling
question
You manage the two-location network shown in the exhibit. Workstations and servers at each location connect to a patch panel using behind-the-wall wiring. The patch panel then connects network hosts to one of three 1000BASE-T switches. Routers are implemented at each location together using a private WAN. The switch ports have auto-MDIX disabled.
